Fruit Basket Molding Steps with Plastic Injection Machine
Basket & Mold Design:Basket Design: Must Dimensions (eg 30 × 20 × 15 cm), Figure (eg for fruit or simple), And specify details like the thickness of the walls and the handle. You do this with software like Solidworks or Catia. For the lattice basket, there must be pins or holes in the mold to create a network pattern. This design should be so that the plastic is easy to inject and the basket is easily separated from the mold.
Mold Making:
Mold material: Steel (such as P20 or H13) or aluminum is used. Steel is more durable for mass production, but aluminum is cheap and good for initial testing.
Construction process: 3D design to CNC or EDM (electric discharge machine) to cut the mold from the metal block. For the lattice holes, the precision of the device is very important.
Polish and adjustment: The mold surface must be smooth so that the final basket is of good quality. Draft Angles (DRAFT ARGLE) also add to the comfortable basket. It is used for the fruit basket because they are light and light. Adjust the injection pressure (depending on the size of the basket, such as 1000-1500 times), and the cooling time (about 20-40 seconds). HAVE.
Injection and production:
Inject melt plastic into the mold. For the lattice basket, the pressure must be uniform so that all the holes are full.
After cooling (with cold water system inside the mold), the device opens the mold and removes the basket.
Check the basket that has no crack, deformation or defect. If there is a problem, the temperature, pressure or mold design may need to be modified.
Fruit basket mold
نظرات و تجربیات شما
دیدگاه شما چیست؟
با ثبت امتیاز خود، به ما در تولید محتوای بهتر کمک کنید.